DEPARTMENT OF LABOR LIBRARY
Collection of Safety/Health Videos and DVDs

Welding Safety
18 records

You may contact the library for assistance by calling 919-707-7880 or by e-mailing [email protected].

ARC WELDING SAFETY - VHS
Call Number: VHS 172
( English )
Tel-A-Train | 21 minutes | Year Produced: 1983

This video discusses: fumes and gases (including nitric oxide, ozone and carbon monoxide); various metal fumes; dangers of ultraviolet and infra-red light; protective clothing, eye and hand protection; and electrical hazards.

CLEARING THE AIR: MASTERING WELD FUME MANAGEMENT - Online (streaming)
Call Number: VOD
( English )
Miller Electric | 60 minutes | Year Produced: 2023

A recorded webinar posted on NSC's Safety+Health YouTube channel: "Experts from Miller...share insights and solutions to address the challenges of weld fume management, including compliance, productivity, worker retention and recruiting." : https://tinyurl.com/4as44ac7

COMMON WELDING HAND AND BODY HAZARDS AND THE PPE SOLUTIONS THAT PROTECT - Online (streaming)
Call Number: VOD
( English )
National Safety Council | 54 minutes | Year Produced: 2022

A recorded webinar posted on NSC's Safety+Health YouTube channel: "experts from Protective Industrial Products...cover information about the risks and hazards associated with welding as well as the latest hand protection and protective clothing solutions available to help welders avoid on-the-job injuries and even death.": https://tinyurl.com/y8hhwx6c

HEXAVALENT CHROMIUM EXPOSURE CONTROL: BEST PRACTICES FOR WELDERS - DVD
Call Number: DVD 788e
( English )
Dept of Environmental & Occupational Health-Univ. of Washington | 46 minutes | Year Produced: 2009

"Topics include characteristics and properties of hexavalent chromium, effects of exposures, engineering and work practice controls, medical surveillance, the respiratory protection program, protective clothing and equipment, proper housekeeping and responding to exposures." Also online via Washington State Dept. of Labor & Industries: https://www.lni.wa.gov/safety/GrantsPartnerships/SHIP/awardees/UWHexavalent/HexChromeVideos.asp **PLEASE NOTE THIS VIDEO REFERENCES WASHINGTON STATE STANDARDS THAT ARE NOT APPLICABLE IN NC; ALSO, IT REFERENCES MSDS WHICH HAS BEEN SUPERSEDED BY SDS PER REVISED (GHS-ALIGNED) HAZCOM STANDARD; PLEASE REFER TO THIS NCDOL PAGE FOR INFO REGARDING NC OSH STANDARDS WITH REGARD TO THIS TOPIC: https://www.labor.nc.gov/safety-and-health/occupational-safety-and-health/occupational-safety-and-health-topic-pages/hexavalent-chromium **

HOT WORK PERMITS - VHS
Call Number: VHS 492
( English )
NUS Training Corp | 10 minutes | Year Produced: 1992

Stresses the importance of using permits when doing hot work in non-designated areas, describes different sections of the permit, and discusses fire prevention, etc.

HOT WORK SAFETY - DVD
Call Number: DVD 633
( English )
J.J. Keller | 16 minutes | Year Produced: 1998

Covers welding, cutting, brazing, and the proper use of shields, respirators, PPE, ventilation, fire prevention, and confined space issues.

HOT WORK SAFETY - VHS
Call Number: VHS 633
( English )
J.J. Keller | 16 minutes | Year Produced: 1998

Covers welding, cutting, brazing, and the proper use of shields, respirators, PPE, ventilation, fire prevention, and confined space issues.

NAVIGATING THE FUTURE: INNOVATIONS IN WELD FUME EXTRACTION - Online (streaming)
Call Number: VOD
( English )
Miller Electric | 43 minutes | Year Produced: 2024

A recorded webinar posted on NSC/Safety+Health's YouTube channel: "Stay ahead of regulatory changes with an in-depth look at standards on weld fume exposure and the latest innovations in weld fume extraction systems. Experts will provide valuable insights into current regulations, upcoming changes and practical steps to ensure your operations remain compliant.": https://tinyurl.com/2p9p7eaf

OXY-ACETYLENE CUTTING - VHS
Call Number: VHS 231
( English )
Laborers-AGC | 10 minutes | Year Produced: 1990

Discusses from start to finish the proper technique in using an oxyacetylene torch and what maintenance steps should be taken to ensure safety.

OXYACETYLENE SAFETY - VHS
Call Number: VHS 173
( English )
Tel-A-Train | 24 minutes | Year Produced: 1980

This video discusses ten safety rules for oxyacetylene use; includes demonstrations and warnings.

SAFE HOT WORK - VHS
Call Number: VHS 450
( English )
NFPA | 18 minutes | Year Produced: 2000

Based on the new NFPA 51 B (“Fire Prevention During Welding, Cutting, and Other Hot Work”), this video helps satisfy training requirements for OSHA 1910.252. It demonstrates proper safety procedures and discusses potential hazards associated with hot work.

TORCH SAFETY - VHS
Call Number: VHS 230
( English )
National Association of Demolition Contractors | 22 minutes | Year Produced: 1988

Supervisors hold training session for new employees to discuss and demonstrate the proper technique for working with a torch. A summary of the safety points is presented at the end.

WELDING SAFETY - VHS
La Seguiradad en la Soldadura
Call Number: VHS 622
( English Spanish )
Long Island Productions | 14 minutes | Year Produced: 1996

Topics covered are: safe work practices, hazards and personal protective equipment, fire safety, hazardous atmospheres, electricity, and compressed gas cylinders.

WELDING SAFETY - DVD
Call Number: DVD 622
( English )
Long Island Productions | 14 minutes | Year Produced: 1996

Topics covered are: safe work practices, hazards and personal protective equipment, fire safety, hazardous atmospheres, electricity, and compressed gas cylinders.

WELDING SAFETY I: SECURING THE WORK ZONE - VHS
Call Number: VHS 139
( English )
Coastal | 16 minutes | Year Produced: 1988

This tape includes an introduction to welding and basic safety precautions such as securing the 360-degree hazardous work zone, proper ventilation and proper clothing. Highlights: oxyfuel gas welding--electric arc welding--securing the 360-degree zone--health hazards--proper ventilation--proper clothing and gear--fire watch.

WELDING SAFETY II: CONFINED SPACE HOTWORK - VHS
Call Number: VHS 140
( English )
Coastal | 13 minutes | Year Produced: 1988

The welder is given a clear step-by-step checklist to follow when working in confined spaces. Highlights are: safe work permit, preparation, atmospheric testing, fire watch, emergency rescue.

WELDING SAFETY III: OXYFUEL GAS CUTTING - VHS
La Seguiradad en la Soldadura
Call Number: VHS 141
( English Spanish )
Coastal | 15 minutes | Year Produced: 1988

Deals with the special challenges of oxyfuel gas cutting, and outlines safe procedures and work conditions. Highlights: characteristics of acetylene and oxygen--proper handling and storage--torch, regulator and cylinder maintenance--proper safety equipment--hook-up procedure--ventilation--preventing spark and spatter--fire watch.

WELDING SAFETY: FROM THE INSIDE - Online (streaming)
Call Number: VOD
( English )
National Safety Council | 58 minutes | Year Produced: 2017

A recorded webinar posted on the National Safety Council's Safety+Health Magazine YouTube channel sponsored by Miller Electric: "In this webinar, we will discuss common compliance issues and key pain points that many companies are facing today. We will also provide strategies to address these issues, including best practices, easy-to-implement solutions and useful resources and innovative products to gain operator acceptance, positively impact productivity and improve compliance...": https://www.youtube.com/watch?v=pO6IHinJOKI